During my winter vacation I worked on installing the crossing circuits for my Rue Courcelle grade crossing. The circuit boards, Grade Crossing Pro/2 and Grade Crossing Pro/2 Expander are made by Logic Rail Technologies. The layout uses Logic Rail products on the Perth Street crossing in Brockville. The GCP/2 will also be used on the Oshawa crossing. I am working on getting everything wired on a sheet of plywood. Once I have the wiring done on this, I'll mount it under the layout and then connect the wires from the crossing signals and (de)activation sensors.
 |
| Logic Rail Technologies's Grade Crossing Pro/2 and GCP2/Expander. The red and green wires will connect all crossing signal lights (left and right). There is a crossing bell sound module and speaker. The expander allows the crossing to function with more than one track. Missing from this is all the wiring for the sensors to activate and deactivate the crossing. |
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.